Free express shipping on orders over $100

Wi-Tek Solar CCTV KIT- WI-Solar IOT-KIT AJAX T2-W

Description

Description

WI-TEK SOLAR SOLUTION KIT FOR CCTV INCLUDES:
1 X Water Proof Enclosure Box WI-IOTBOX02
1 X Solar Powered PoE Switch WI-PS306GF-UPS-15A
1 X Cloud Controller WI-IOT100
1 X Industrial Gateway WI-IOT110
2 X WI-4G Antenna
1 X Lithium Battery 12.8V 100Ah (Bluetooth)
2 X 8MP Ajax Turret White (2.8mm)
2 X WD 256GB SD Card

Datasheet
Tech Specs

WI-TEK SOLAR CCTV KIT- WI-SOLAR IOT-KIT Ajax T2-W

WI-IOTBOX02
Overall Size(W*H*D) 400*600*250mm

Inner Size(W*H*D)

350*560*240mm

Weight(kg)

15.8

Standard Parameter

Thickness

1.2mm

Material

SUS/Stainless Steel

Color

Light Grey + Grey

Protect Level

IP66, IK10

Door

1

Electrical Install

WI-IOTBOX02 Plate*3

Surface Treatment

Electrostatic Spraying

Installation

Junction, Distribution, Electrical, Battery, Control, Monitoring etc. Outdoor waterproof Enclosure Box

WI-TEK GIGA 5 PORTS UPS SOLAR SWITCH 15A -
WI-PS306GF-UPS-15A

Interface

5 10/100/1000Mbps RJ45 Ports
1 1000Mbps SFP Slot

PoE Ports (RJ45)

Port 1: 802.3bt PoE 60W 1/2/4/5 (+), 3/6/7/8 (-)
Port 2-3: 802.3af/at PoE 1/2(+), 3/6(-)
Port 4-5: 802.3af/at PoE 1/2(+), 3/6(-)
or Passive 24V PoE 24W 4/5(+), 7/8(-)

Network Media

10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
100BASE-TX/1000Base-T: UTP category 5, 5e, 6 or above cable
(maximum 100m)
1000BASE-X: MMF, SMF 1000Base-L X:62.5μm/50μm MM(2m~550m) or 10μm
SMF(2m~5000m)

Fan Quantity

Fanless

Power Consumption

120W (max. with PoE device connected) 5W Max (without PoE output)

Power Supply

For 12V Battery: DC 15-32V
For 24V Battery: DC 30-57V

Power Priority

Solar Power - DC - Battery

Solar Controller Input

≤32V(12V standard)
≤45V(24V standard)300W Max

Battery Type

Lead acid/lithium

Battery Input

12/24V 15A

Exchange Capacity

12Gbps

Packet Forwarding Rate

8.94Mpps

Mac Address Table

2k

Jumbo Frame

10240Bytes

Protection Level

6kV Surge Immunity
6kV Air Discharge

Package Dimension

270×220×67 mm

Switch Dimension

160×130×34 mm

Gross Weight

1.56kg

Net Weight

0.73kg

Package Contents

1 x PoE Switch
1 x 24V 5A Power Adapter
1 x Power Cord
1 x Quick Installation Guide

Working Temperature

-20℃~60℃

Storage Temperature

30℃~70℃

Working Humidity

Working Humidity

Storage Humidity

5%~90% RH non-condensing

WI-IOT100

Interface 1*10/100Mbps PoE IN RJ45 port
1*10/100Mbps RJ45 port
Serial Port 1*RS-485 port
Signal: 485-A, 485-B, GND, VCC(5V)
Baud Rate: 300-230400 bps
Data bits: 8bits, 7bits
Stop bit: 1 bit, 2bits
Check bit: None, Even, Odd
Support software flow control
Flash 8MB
DDR2 64MB
LED Indicator 1*PWR, Power indicator, 1*SYS, System indicator
Reset Button Short press 1~3 seconds: Reboot the device.
Long press over 5 seconds: Restore the factory default configuration
Power Supply IEEE 802.3af PoE IN
12~54V DC (The two DC power supplies cannot be connected at the same time)
Power Consumption <1.8W(without RS-485 VCC output)
Dimensions 105*74*30mm
Weight 0.21kg
Package Dimensions 182*133*36mm
Package Weight 0.3kg
Fan Quantity Fan-less
Material Metal shell
Color Silver
Operating Environment -20°C to 65°C, 5%~95% (non-condensation)
Storage Environment -40°C to 70°C, 5%~95% (non-condensation)
WI-IOT110
Mobile 4G (LTE) – Cat 4 DL up to 150 Mbps, UL up to 50Mbps; DC-HSPA+; UMTS; TD-SCDMA; EDGE; GPRS
CPU MIPS 24Kc, 580 MHz , 300Mbps WiFi
Memory 16 MBytes Flash, 128MBytes DDR2 RAM
Ethernet 3 * 10/100 Ethernet ports: 1 * WAN (configurable as LAN, 60W PoE In), 2 * LAN (48V 12+ 36- PoE Out)
WAN PoE In Compatible with af(15W), at(30W), bt(60W)
Power supply 48 -60VDC, 2 pin DC connector
PoE Budget If PD power input, PoE output ≦50W
If power adaptor DC input, PoE output: 60W max
Connectors

1 * DC,
3 * Ethernet,
2 * Mobile SMA,
2 * WiFi RP-SMA,
1 * DB9 FeMale((RS232),
1 * Terminal (RS485/RS422 )

SIM 1 * external SIM holder
Operating temperature -30℃ ~ +65℃
Antenna WiFI 2*SMA 4G 2*SMA
Installation DIN-rail mounted
Dimensions (W*D*H) 45*95*145 mm
New weight 0.5 kg
Cellular 3GPP,3G/4G
Networking features NAT, Static/Dynamic routing, Firewall, OpenVPN

Ajax 8MP Turret White Camera

Megapixel 8MP
Resolution Up to 3840 x 2160 px @ 20 fps (4K UHD)
Lens 4 MM: 75°-85° Viewing Angle
Day/Night Switch Automatic
Image processing True WDR (hardware and software)
Video Compression H.265, H.264
Bitrate 100 Mbps full-duplex
Simultaneous Live View Up to 5 Channels
User Access Up to 200 Users
Alarm Trigger Motion Detection
AI-recognition
Detector alarm
Automation scenarios
Hubs All Ajax hubs
Video recorders NVR
Power supply unit 12 V ± 20% , 1 А
Up to 7.5 W of mains power consumption
Ethernet port PoE Standard 802.3at
Dimensions 103 × 98 × 98 mm
Weight 475 g
Colors Black, White
Operating temperature range from 25 C to +40 C; from 13 F to 104 F
Operating humidity up to 90%
Power supply unit 12 V ± 20% , 1 А
Ethernet port PoE Standard 802.3at
Compliance CE; RoHS; NDAA
3-Years Warranty

Wi-Tek’s 3-year manufacturer warranty covers defects in materials or broken components that could affect the normal operation of the product. If a device is faulty, SECSOURCE will facilitate the warranty process with the manufacturer for you. We aim to do so in a manner that is as fast and efficient as possible. The warranty does not cover damage to the product resulting from incorrect installation or negligence, damage caused by a natural disaster, or theft.

Please note, that we do not cover inbound shipping of the return to us however if a replacement is to be sent we will cover outbound shipping to the customer. We will need the serial number of the product and your order number.

Please don’t ship us anything until you have had confirmation from a member of our team and they have given you an RMA number and return address. Contact us at support@secsource.com.au or 1300-049-519.


Wi-Tek Solar CCTV KIT- WI-Solar IOT-KIT AJAX T2-W

Product form

SKU: WI-SOLAR IOT-KIT AJAX T2-W

$6,379.00 $3,816.00 Incl. GST

    • Guaranteed secure & safe checkout.

      paypal
    • FREE Express Courier Shipping for all orders over $100
    • 30-Day Returns Policy
    • Back to Base Australian Warranty & Tech Support
    • Australian Stock, No Grey Import Products

    Description

    Description

    WI-TEK SOLAR SOLUTION KIT FOR CCTV INCLUDES:
    1 X Water Proof Enclosure Box WI-IOTBOX02
    1 X Solar Powered PoE Switch WI-PS306GF-UPS-15A
    1 X Cloud Controller WI-IOT100
    1 X Industrial Gateway WI-IOT110
    2 X WI-4G Antenna
    1 X Lithium Battery 12.8V 100Ah (Bluetooth)
    2 X 8MP Ajax Turret White (2.8mm)
    2 X WD 256GB SD Card

    Datasheet
    Tech Specs

    WI-TEK SOLAR CCTV KIT- WI-SOLAR IOT-KIT Ajax T2-W

    WI-IOTBOX02
    Overall Size(W*H*D) 400*600*250mm

    Inner Size(W*H*D)

    350*560*240mm

    Weight(kg)

    15.8

    Standard Parameter

    Thickness

    1.2mm

    Material

    SUS/Stainless Steel

    Color

    Light Grey + Grey

    Protect Level

    IP66, IK10

    Door

    1

    Electrical Install

    WI-IOTBOX02 Plate*3

    Surface Treatment

    Electrostatic Spraying

    Installation

    Junction, Distribution, Electrical, Battery, Control, Monitoring etc. Outdoor waterproof Enclosure Box

    WI-TEK GIGA 5 PORTS UPS SOLAR SWITCH 15A -
    WI-PS306GF-UPS-15A

    Interface

    5 10/100/1000Mbps RJ45 Ports
    1 1000Mbps SFP Slot

    PoE Ports (RJ45)

    Port 1: 802.3bt PoE 60W 1/2/4/5 (+), 3/6/7/8 (-)
    Port 2-3: 802.3af/at PoE 1/2(+), 3/6(-)
    Port 4-5: 802.3af/at PoE 1/2(+), 3/6(-)
    or Passive 24V PoE 24W 4/5(+), 7/8(-)

    Network Media

    10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
    100BASE-TX/1000Base-T: UTP category 5, 5e, 6 or above cable
    (maximum 100m)
    1000BASE-X: MMF, SMF 1000Base-L X:62.5μm/50μm MM(2m~550m) or 10μm
    SMF(2m~5000m)

    Fan Quantity

    Fanless

    Power Consumption

    120W (max. with PoE device connected) 5W Max (without PoE output)

    Power Supply

    For 12V Battery: DC 15-32V
    For 24V Battery: DC 30-57V

    Power Priority

    Solar Power - DC - Battery

    Solar Controller Input

    ≤32V(12V standard)
    ≤45V(24V standard)300W Max

    Battery Type

    Lead acid/lithium

    Battery Input

    12/24V 15A

    Exchange Capacity

    12Gbps

    Packet Forwarding Rate

    8.94Mpps

    Mac Address Table

    2k

    Jumbo Frame

    10240Bytes

    Protection Level

    6kV Surge Immunity
    6kV Air Discharge

    Package Dimension

    270×220×67 mm

    Switch Dimension

    160×130×34 mm

    Gross Weight

    1.56kg

    Net Weight

    0.73kg

    Package Contents

    1 x PoE Switch
    1 x 24V 5A Power Adapter
    1 x Power Cord
    1 x Quick Installation Guide

    Working Temperature

    -20℃~60℃

    Storage Temperature

    30℃~70℃

    Working Humidity

    Working Humidity

    Storage Humidity

    5%~90% RH non-condensing

    WI-IOT100

    Interface 1*10/100Mbps PoE IN RJ45 port
    1*10/100Mbps RJ45 port
    Serial Port 1*RS-485 port
    Signal: 485-A, 485-B, GND, VCC(5V)
    Baud Rate: 300-230400 bps
    Data bits: 8bits, 7bits
    Stop bit: 1 bit, 2bits
    Check bit: None, Even, Odd
    Support software flow control
    Flash 8MB
    DDR2 64MB
    LED Indicator 1*PWR, Power indicator, 1*SYS, System indicator
    Reset Button Short press 1~3 seconds: Reboot the device.
    Long press over 5 seconds: Restore the factory default configuration
    Power Supply IEEE 802.3af PoE IN
    12~54V DC (The two DC power supplies cannot be connected at the same time)
    Power Consumption <1.8W(without RS-485 VCC output)
    Dimensions 105*74*30mm
    Weight 0.21kg
    Package Dimensions 182*133*36mm
    Package Weight 0.3kg
    Fan Quantity Fan-less
    Material Metal shell
    Color Silver
    Operating Environment -20°C to 65°C, 5%~95% (non-condensation)
    Storage Environment -40°C to 70°C, 5%~95% (non-condensation)
    WI-IOT110
    Mobile 4G (LTE) – Cat 4 DL up to 150 Mbps, UL up to 50Mbps; DC-HSPA+; UMTS; TD-SCDMA; EDGE; GPRS
    CPU MIPS 24Kc, 580 MHz , 300Mbps WiFi
    Memory 16 MBytes Flash, 128MBytes DDR2 RAM
    Ethernet 3 * 10/100 Ethernet ports: 1 * WAN (configurable as LAN, 60W PoE In), 2 * LAN (48V 12+ 36- PoE Out)
    WAN PoE In Compatible with af(15W), at(30W), bt(60W)
    Power supply 48 -60VDC, 2 pin DC connector
    PoE Budget If PD power input, PoE output ≦50W
    If power adaptor DC input, PoE output: 60W max
    Connectors

    1 * DC,
    3 * Ethernet,
    2 * Mobile SMA,
    2 * WiFi RP-SMA,
    1 * DB9 FeMale((RS232),
    1 * Terminal (RS485/RS422 )

    SIM 1 * external SIM holder
    Operating temperature -30℃ ~ +65℃
    Antenna WiFI 2*SMA 4G 2*SMA
    Installation DIN-rail mounted
    Dimensions (W*D*H) 45*95*145 mm
    New weight 0.5 kg
    Cellular 3GPP,3G/4G
    Networking features NAT, Static/Dynamic routing, Firewall, OpenVPN

    Ajax 8MP Turret White Camera

    Megapixel 8MP
    Resolution Up to 3840 x 2160 px @ 20 fps (4K UHD)
    Lens 4 MM: 75°-85° Viewing Angle
    Day/Night Switch Automatic
    Image processing True WDR (hardware and software)
    Video Compression H.265, H.264
    Bitrate 100 Mbps full-duplex
    Simultaneous Live View Up to 5 Channels
    User Access Up to 200 Users
    Alarm Trigger Motion Detection
    AI-recognition
    Detector alarm
    Automation scenarios
    Hubs All Ajax hubs
    Video recorders NVR
    Power supply unit 12 V ± 20% , 1 А
    Up to 7.5 W of mains power consumption
    Ethernet port PoE Standard 802.3at
    Dimensions 103 × 98 × 98 mm
    Weight 475 g
    Colors Black, White
    Operating temperature range from 25 C to +40 C; from 13 F to 104 F
    Operating humidity up to 90%
    Power supply unit 12 V ± 20% , 1 А
    Ethernet port PoE Standard 802.3at
    Compliance CE; RoHS; NDAA
    3-Years Warranty

    Wi-Tek’s 3-year manufacturer warranty covers defects in materials or broken components that could affect the normal operation of the product. If a device is faulty, SECSOURCE will facilitate the warranty process with the manufacturer for you. We aim to do so in a manner that is as fast and efficient as possible. The warranty does not cover damage to the product resulting from incorrect installation or negligence, damage caused by a natural disaster, or theft.

    Please note, that we do not cover inbound shipping of the return to us however if a replacement is to be sent we will cover outbound shipping to the customer. We will need the serial number of the product and your order number.

    Please don’t ship us anything until you have had confirmation from a member of our team and they have given you an RMA number and return address. Contact us at support@secsource.com.au or 1300-049-519.


    Recently viewed products

    © 2024 Spy Monkey Surveillance, Powered by Shopify

      • American Express
      • Apple Pay
      • Google Pay
      • Mastercard
      • PayPal
      • Shop Pay
      • Union Pay
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create account